Docks Unlimited - Naylor system docks, pipe docks, custom docks

    Payment Opions:
    Visa / Mastercard
    PC Banking
    Money Order
    Certified Cheque
    Cash

Docks Unlimited is setting the standard for Dockware using high quality materials and workmanship. Our DOCKWARE gives strength and stability to dock systems. The Dockware is constructed of plate steel, welded , then HOT-DIPPED GALVANIZED to ensure its durability. This quality DOCKWARE is used in both PIPE-LEG DOCKS and FLOATING DOCKS.

Already know what parts you need?
Choose from the menu below to go directly to that part!

a) Base Plate
b) 4' Leg Brace
c) Hinge
d) Pipe-leg Holder
e) Pipe-leg
f) Steel Corner
g) Steel Corner - 5"
h) Steel Corner - 9"
i) Anchor chain - 5/16"
j) Connector - 9"
k) Mooring Cleat
l) Dock Ladder
m) Nuts, Bolts and Washers
n) Cables and Clamps etc
o) Dock Bumper

Don't know what you need????
Scroll down for more information on the two types of docks available, and what parts are needed to build them yourself!!!

THE PIPE-LEG DOCK

These docks should be used where hard bottoms exist. They are not suitable for muddy conditions, as the pipe legs will sink into the mud. A few inches of mud causes no problems if there is a hard bottom under the mud. They are suitable for rough water. The maximum water depth for a Pipe-Leg Dock should be no more than its width.

PARTS NEEDED FOR PIPE-LEG DOCKS

a) Base Plate
b) 4' Leg Brace
c) Hinge - to join sections together
d) Pipe-leg Holder
e) Pipe-leg - 2" o.d. pipe
f) Steel Corner - 5" braced

also: anchor cage, dock bumper, ladder, nuts, bolts, washers and Mooring Whips

THE FLOATING DOCKS

These docks are ideal for locations where the water is too deep or the bottom conditions too muddy for Pipe-leg Docks.

PARTS NEEDED FOR FLOATING DOCKS

g) Steel Corner - 5"
(with chain slot in brace)
h) Steel Corner - 9"
(with chain slot in brace.)
To be used with 2" x 10" or 2" x 12" lumber or larger.
i) Anchor chain - 5/16"
j) Connector - 9" to join sections of Floating Dock
k) Mooring Cleat Needed on floating docks
l) Dock Ladder Galvanized steel
m) Nuts, Bolts and Washers
n) Cables and Clamps etc
o) Dock Bumper White rubber bumper

For our full hardware catalog, suggested dock plans and/or a Naylor Color Brochure and price list, please send $5.00 (cash or cheque) and an 8 1/2 x 11 self-addressed envelope to the following address..

RR#1, 084577 SR 6
Bognor, Ontario
Canada
N0H 1E0